Language selection: English/China

News

What do you know about the maintenance of masks?

Masks are very important in the current environment. The masks we wear are not only very important when testing, but also play the same role in maintenance. Today, we will explain to you what the maintenance of masks are. Let's introduce the Hangzhou mask inspection section for you.
 
Hangzhou mask inspection
 
1. Maintain appearance. Masks are tools we wear on our faces, and some even need to enter the operating room. Therefore, the production of masks must require cleaning the mask machine every day. Aftercutting off the power supply every day, organize personnel to clean the working face and plates of the equipment with masks. Be careful not to use water, but to use alcohol and other non-toxic and volatile cleaning solutions.
 
2. Maintenance of ultrasonic system, check whether the ultrasonic system (composed of ultrasonic box, ultrasonic transducer, welding head and connecting wire) is clean, especially the ultrasonic box, ultrasonic transducer (sensing element) and welding head (mold) need to be cleaned without water, and whether the connecting wire is firm. Often check the wear degree of ultrasonic welding head (mold) of bending machine. Carefully check whether the pointer of voltmeter and ammeter on ultrasonic electric box is normal. ,
 
3. Drive system maintenance, including motor, gear, reducer, sprocket, chain, conveyor belt and other components, check whether the dust on the motor surface affects heat dissipation, whether the gear and sprocket are oiled or fixed. Is the chain tight? Is there any foreign matter? Is there a complete connection between each part? Is there enough lubricating oil for the reducer? The lubricating oil must be changed every 1000-1500 hours.
 
4. The maintenance of pneumatic system consists of air source filtration system, air pipe and cylinder. Does air filter check water? (air compressor drainage: in areas with high humidity, drain water to air compressor every day). Check whether the air pipe is leaking? Is the cylinder leaking?
 
The above four points are for the maintenance of masks on the content of the introduction, then this article is over here, thank you for reading!
用手机扫描二维码关闭
二维码